PP photo paper

"Adhesive-free" printing paper is suitable for waterproof poster printing, typically used for posters and store banners. It can also be used with scrolls to create a roll-up display or with display stands such as X-stands, H-stands, and pull-out banners. All of these require PP photo paper, which can be selected under the "Processing" section of the "PP Photo Paper" category. This common printing material features vibrant and bright colors. Cold lamination enhances the visual effect and improves weather resistance and durability, making it suitable for long-term use in various locations.

Water-based ink output:

Not waterproof or UV resistant, suitable for indoor or short-term display use.

Oil-based ink output:

Waterproof and UV resistant, suitable for extended outdoor use.

UV ink output:

It dries quickly after printing, is waterproof, and has a low rate of color loss, performing exceptionally well on dark images and suitable for long-term indoor and outdoor production.

UV electrostatic stickers

Made of transparent material with no adhesive backing, the material itself is electrostatically treated for direct adhesion, but it is prone to air bubbles. Suitable for application on transparent glass. Printed using UV equipment, it can print white ink and offers three modes: Color + White UV Electrostatic Adhesive (One-way Full Color), Color + White + Color UV Electrostatic Adhesive (Two-way Full Color), and White Ink UV Electrostatic Adhesive (Single-layer White Ink).

Floor stickers

Features include wear resistance, slip resistance, long-lasting color and gloss, antibacterial properties, heat resistance, resistance to slightly alkaline chemicals, convenience, and environmental friendliness. Its slip-resistant properties can increase the safety of public spaces and are commonly used in supermarkets, stores, and on smooth surfaces.

Hole stickers

Also known as see-through stickers or bus stickers, the substrate is covered with holes, giving the material a see-through effect that allows people to see through it. It is commonly used on transparent glass substrates and is often seen on bus windows or vehicle body advertisements.

slide

Highly transparent with vibrant colors, suitable for product displays requiring backlighting. Ideal for indoor light boxes, signs, cosmetic display racks, and clip-on light box panels. Clip-on light box panels are made of highly transparent plastic, thicker and harder than PP, with vibrant colors, suitable for product displays where backlighting is not required. Suitable for indoor light boxes, signs, shop windows, and cosmetic counters. The surface lamination prevents scratches. Cold lamination is available in two materials: matte film and glossy film. Matte film reduces glare, while glossy film provides greater brightness but is prone to glare; the choice depends on the desired effect.

PVC large image

With a pure white surface, high gloss, and vibrant colors, it requires cold lamination (matte or glossy finish) before use. It has adhesive backing (white glue, gray glue, etc.) and is stretchy, allowing it to be applied anywhere desired. Suitable for various large outdoor display posters or lightbox stickers; applicable to many commercial display posters and decorative items.

PVC white glue

Also known as white P, the material itself has ductility, light transmission, waterproof and weather-resistant properties. It is commonly used for outdoor large advertising billboards, indoor wall stickers, store or window decorations, and large posters. It can also be used for standees, walls, glass, acrylic, vehicle advertising, etc. It is a widely used material. The surface lamination can prevent scratches. Cold lamination is divided into frosted film and glossy film. Frosted film is less reflective, while glossy film can make it brighter but is prone to glare. It depends on the desired effect.

PVC grey glue

Commonly known as gray PVC, it is opaque, water-resistant, weather-resistant, and malleable, making it difficult to break. It's the most commonly used material for large-format printing, often used in exhibitions, applied to woodwork, and also suitable for advertising billboards, interior walls, large posters, elevators, etc., with a wide range of applications. As the name suggests, the adhesive backing of gray PVC is gray, suitable for walls with a clearly visible background, and can cover the existing wall surface. It can be selected with a matte or glossy finish, and can also be cut to size. PVC can be mounted on boards, and after mounting, it is commonly used for: large event backdrops, standees, tabletop standees, handheld signs, decorative handheld boards, and raffle boxes. Different boards have different characteristics, so you can choose the appropriate material according to your needs. The PVC surface can be selected with a matte or glossy finish, and can also be cut to size.

High shielding

The effect is the same as gray glue, mainly used to replace the dull color caused by traditional gray glue. The surface lamination can prevent scratches, extend the colorfastness and waterproof function. Cold lamination is divided into frosted film and glossy film. Frosted film is not easy to reflect light, while glossy film can make it brighter but is prone to glare. It depends on the desired effect.

Semi-permeable PVC adhesive

Commonly known as semi-transparent PVC, it has a white base material and a semi-transparent effect. Its light transmittance is between that of white PVC and fully transparent PVC. It is often used for mounting hollow boards and acrylic sheets in light boxes.

Fully transparent PVC adhesive backing

Commonly known as fully transparent PVC or transparent P, this material has a transparent substrate and is suitable for application on transparent glass, light boxes, or acrylic sheets. UV printing is used, and white ink can be printed. Three printing modes are available. It's important to note that for fully transparent single-color printing, because the substrate is transparent, the image will exhibit a color fading phenomenon similar to stained glass. For a transparent substrate and high image saturation, select "color + white + color". Single-color (single-layer full-color), white ink UV fully transparent PVC (monochrome white ink), color + white + color UV fully transparent PVC (mirror image on the back).

Low viscosity, residue-free PVC

The material is coated paper, characterized by its reusability and ability to be repeatedly peeled and pasted onto surfaces without leaving residue. However, due to its reusability, the adhesive strength is relatively weak and it is easy to peel off. It is commonly used for memo paper or some reusable tapes. Cold lamination can prevent surface scratches and provide water resistance. Cold lamination comes in two materials: matte film and glossy film. Matte film is less reflective, while glossy film can make it brighter but is prone to glare. The choice depends on the desired effect.

Divided into matte film and glossy film

With waterproof, stain-resistant, and scratch-resistant properties, it is commonly used for protecting images such as wedding photos, posters, and display boards. It can be applied without heating and is easy to use. Heat lamination, on the other hand, requires high-temperature pressing and is suitable for thicker paper materials. It enhances image strength and durability, effectively preventing moisture, deformation, and fading, thus extending the display life. Choosing different lamination methods according to needs can significantly improve the quality and preservation of the finished product.

Cold lamination is a flexible process, applied to one side at a time, with a thin plastic film applied to the surface. Both matte and glossy films are available. As long as the entire sheet or the back doesn't get wet, it's generally waterproof and stain-resistant.

Cold laminating film is made of transparent PVC with adhesive backing. According to the texture of the film surface, it can be divided into glossy film, matte film, and protective film with special texture. Glossy film and matte film are widely used in advertising production.